Log In To Em; Log Out Of Em; Application Button; Push To Talk Service - Cisco 7925G User Manual

Log In to EM

Log In to EM
Procedure
Step 1
Choose
Step 2 Enter your user ID and PIN (provided by your system administrator).
Step 3 If prompted, select a device profile.

Log Out of EM

Procedure
Step 1
Choose
Step 2
When prompted to log out, press Yes.

Application Button

Use the Application button
services on your phone.
Depending on how your system administrator sets up the Application button, you may be able to use it from
the main screen only, or you may use it from any menu or service, or even when the phone is locked.
The Application button can also be configured to start an application immediately after you press it or only
after you hold it for several seconds.
For more information, contact your system administrator.

Push to Talk Service

The Push to Talk service provides immediate communication (similar to a two-way radio) with members of
your organization. Your system administrator must set up the Push to Talk service, and then you must subscribe
to the service.
Your system administrator provides detailed information about how to use your Push to Talk service.
Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
90
> EM Service (name can vary).
> EM Service (name can vary).
(on left side of phone) to start applications such as Push to Talk or other
Applications