Cisco Unified Wireless Ip Phone 7925G Desktop Charger Notes - Cisco 7925G User Manual

Cisco Unified Wireless IP Phone 7925G Desktop Charger
The Battery LED lights green if the battery is charged, or red if the battery is charging.
Step 2 If the Battery LED does not light up as red or green, check that the battery was installed correctly (label side
up). You may need to remove the battery, reorient it, and reinsert it firmly against the contacts.

Cisco Unified Wireless IP Phone 7925G Desktop Charger Notes

Unplugging the Cisco Unified Wireless IP Phone 7925G Desktop Charger from the electrical outlet has the
following consequences:
• As long as a charged spare battery is in place, the station functions normally. The spare battery provides
• If an uncharged spare battery is in place, the station does not function. The Cisco Unified Wireless IP
power for the speakerphone.
◦ When the Battery LED starts flashing amber-yellow, the charge on the spare battery is low. Active
calls continue and new calls can be placed, as long as there is sufficient power in the spare battery.
When the spare battery power is low, the speakerphone does not operate, but calls can continue.
◦ When the Battery LED flashes amber-yellow and dims, the spare battery charge has dropped too
low. Active calls disconnect and new calls cannot be placed. The Cisco Unified Wireless IP Phone
7925G Desktop Charger should be connected to an electrical outlet or a charged spare battery
installed.
Phone 7925G Desktop Charger must be plugged into an electrical outlet, or a charged spare battery
installed.
Cisco Unified Wireless IP Phone 7925G Desktop Charger Notes
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
123