Basic Call Options; Place Call With Handset - Cisco 7925G User Manual

Basic Call Options

Basic Call Options
The following sections describe some easy ways to place a call on your wireless IP phone.
Note Your system administrator can configure your phone to alert you (by beeping) when it is out of range of
the wireless network. You can only use your phone if it is within range of the wireless network. For more
information, contact your system administrator.
Tips
• When you start to dial a number, your phone tries to anticipate the number you are dialing by displaying
• If you make a mistake while dialing, press << to erase digits.
• To redial the last number, press
• Your phone might be set up for international call logging, which is indicated by a plus (+) symbol on
• If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
• If you press any digits while on an active call, the digits display on the screen for 2 seconds. The digits
• If you hear a beep tone from your phone, you might be out of range of the wireless network. Move to a
• For information on using your Bluetooth wireless headset to redial a number, see the documentation

Place Call with Handset

Procedure
Step 1 Dial the phone number.
Step 2
Press
Note that you do not hear dial tone.
Related Topics
Call Answering, on page 38
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
30
matching numbers from your Placed Calls log. This is called Auto Dial. To call a number displayed with
Auto Dial, scroll to the number and press
the call logs, redial, or call directory entries. Contact your system administrator for more information.
administrator for more information.
display again if you press additional digits.
location where you can see a strong signal icon
from your headset manufacturer.
to place your call.
.
two times.
on the phone if you wish to use your phone.
Calling Features