Charge Battery With Ac Power Supply - Cisco 7925G User Manual

Phone Installation
You can also charge your battery using a desktop charger or multicharger. For more information, see
Note
Cisco Unified Wireless IP Phone 7925G Desktop Charger, on page 115
Phone 7925G, 7925G-EX, and 7926G Accessory Guide.
Related Topics
Cisco Unified Wireless IP Phone 7925G Desktop Charger, on page 115

Charge Battery with AC Power Supply

You can charge your battery quickly by connecting the AC power supply to the phone. To accommodate
different AC power receptacles, you must insert the appropriate AC plug adapter on the AC power supply.
You can use the phone while the battery is being charged. After the battery is charged, you can unplug the
power supply cord, or you can leave the phone plugged into the power cord.
Depending on configuration, your phone may automatically power off when it is connected to an AC
Note
power source. AC power sources include the power supply, desktop charger, or multicharger. If the phone
is in use (during a call or is using an XML phone service) when it is connected to the AC power source,
it powers off after the call or phone service terminates.
For more information, ask your system administrator.
To charge the battery in the phone using the AC power supply, the following figure shows the steps.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
Charge Battery with AC Power Supply
and Cisco Unified Wireless IP
21