Switch Between Connected Calls On Differentlines; Switch From Connected Call To Answer Ringing Call (Using Handset); Call Transfer - Cisco 7925G User Manual

Switch Between Connected Calls on DifferentLines

Switch Between Connected Calls on DifferentLines
Procedure
Step 1
Press
If a single call is holding on the line, the call automatically resumes.
Step 2 If another call is holding, scroll to highlight the appropriate call and press Resume.

Switch from Connected Call to Answer Ringing Call (Using Handset)

Procedure
Step 1
If the call is ringing on the current line, press
Step 2
If the call is ringing on a different line, press
Any active call is placed on hold.

Call Transfer

Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Tips
• If on-hook transfer is enabled on your phone, you can either disconnect to complete the transfer, or
• If on-hook transfer is not enabled on your phone, you must use Trnsfer again before you disconnect.
• You cannot use Trnsfer to redirect a call on hold. To remove the call from hold before you transfer it,
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
44
to change to another line.
choose Options > Trnsfer and then disconnect.
Otherwise, your call will be placed on hold instead of transferred.
choose Resume.
.
to switch to the other line and press
Calling Features
.