Connector Description - Supermicro X10SLD-F User Manual

Jumper
JBT1 CMOS Clear
JPG1 VGA Enable
JPME1 ME Recovery
JPME2 Manufacture Mode Select
JWD1 Watch Dog Enable
Connector
Battery (VBAT)
IPMI_LAN
JKVM1
JSD1
JTPM1
Micro-LP PCI-E Slot
(CPU) Slot1 PCI-E Slot
I-SATA4
(S-)SATA/SAS0-3
S-SGPIO1
SW1
UID
USB0 (3.0)
LED Description
LE5 BMC Heartbeat LED
LED5 Power Fail/Fan Fail/Overheat LED Red: On
LED6 UID LED
X10SLD-F/X10SLD-HF Jumpers
Description
X10SLD-F/X10SLD-HF Headers/Connectors
Onboard Battery
IPMI_Dedicated LAN
USB 2.0 (x2)/VGA (Monitor)/COM Connector for Remote Console
Redirection or Remote Network Interface
SATA DOM (Device_On_Module) Power Connector
Trusted Platform Module/Port 80 Connector
SMC-Proprietary Micro Low-Profile (LP) PCI-Express 3.0 x8 Slot
PCI-Express 3.0 x8 Slot 1 supported by the CPU
(Intel PCH) Serial_Link SATA Port4
(Internal SATA2 Connector for SATA DOM on X10SLD-F)
(Internal SATA3 Connector for SATA DOM on X10SLD-HF)
Serial_Link SATA/SAS Ports 0-3 (SATA3/SAS2 is only for add-on
cards)
Serial Link General Purpose Input/Output Header 1
Power Switch/LED Indicator
Unit Identifier (UID) Button (JUIDB1)
Internal Type A USB 3.0 Port 0
X10SLD-F/X10SLD-HF LED Indicators
Description
Color/State
Green: Blinking BMC Functions Normally
Power Fail, Fan Fail or Overheating
Blue: On Unit Identified
1-5
Chapter 1: Introduction
Default
(See Chpt. 2)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (NMI)
Status