Connector Description - Supermicro X11DPU-Z+ User Manual

Table of Contents

Advertisement

Connector
Description
Powered S-SATA ports 4/5 with power pins built-in and with support of Supermicro SuperDOM
S-SATA4/S-SATA5
(Disk On Module) devices
PCI-Express 3.0 (x16+x16) slots supported by CPU2 for Supermicro proprietary riser card (w/left
SXB1A/SXB1B/SXB1C
riser card support)
SXB2
PCI-Express 3.0 x8 (in x16) slot for center right riser card slot
PCI-Express 3.0 x16+x16+x8 slots far right ultra riser card w/support of SAS3 AOM and LAN
SXB3A/SXB3B/SXB3C
options (via four NVMe ultra riser cards)
T-SGPIO3
Serial Link General Purpose I/O (GPIO) port
UID (JUIDB2)
Unit Identifier (UID) switch
USB0/1 (USB 3.0)
Back panel USB 3.0 ports
USB2 (USB 3.0)
Type A USB 3.0 header (JUSBA1)
USB3/4 (3.0)
USB header for two USB 3.0 connections 3/4 for front access (JUSB3)
VGA
VGA Port
LED
Description
LED1
UID (Unit Identifier) LED
LE2
Onboard Power LED
LEDM1
BMC Heartbeat LED
Status
Solid Blue: Unit identified
On: Onboard power on
Blinking Green: BMC normal
13
Chapter 1: Introduction

Advertisement

Table of Contents
loading

Table of Contents