Me Recovery; Manufacturer Mode Select - Supermicro X10SLD-F User Manual

X10SLD-F/X10SLD-HF User's Manual

ME Recovery

Set Jumper JPME1 to select ME Firm-
ware Recovery mode, which will limit
system resource for essential function
use only without putting restrictions on
power use. In the single operation mode,
online upgrade will be available via Re-
covery mode. See the table on the right
for pin definitions.

Manufacturer Mode Select

Close this jumper (JPME2) to bypass
SPI flash security and force the system
to use the Manufacturer mode which
will allow the user to flash the system
firmware from a host server to modify
system settings. See the table on the
right for jumper settings.
UID
JKVM1
SW1
PWR
LE5
IPMI_LAN
BMC
X10SLD-F/HF
Rev. 1.00
B
JPME2
BIOS
Intel
VBAT
PCH
JBT1
A
JPME1
CPU1
USB0
(3.0)
2-24
ME Recovery
Jumper Settings
Jumper Setting Definition
1-2 Normal (Default)
2-3 ME Recovery
ME Mode Select
Jumper Settings
Jumper Setting Definition
1-2 Normal (Default)
2-3 Manufacture Mode
A. JPME1
B. JPME2