Unit Identifier Switch/Uid Led Indicators; Power Switch/Led - Supermicro X10SLD-F User Manual

X10SLD-F/X10SLD-HF User's Manual

Unit Identifier Switch/UID LED Indicators

A Unit Identifier (UID) button and a LED Indicator
are located on the motherboard. The UID button is
located at JUIDB1, and LED is located at LED6 on
the backplane. When you press the UID button, the
UID LED Indicator will be turned on. Press the UID
button again to turn off the LED Indicator. The UID
Indicator provides easy identification of a system unit
that may be in need of service.
Note: UID can also be triggered via IPMI
on the motherboard. For more information
on IPMI, please refer to the IPMI User's
Guide posted on our website @http://www.
supermicro.com.

Power Switch/LED

A power switch/LED indicator is located next to the UID button/LED on the backplane
of the motherboard. Use this switch to power on or power off the system.
B A
UID
JKVM1
SW1
PWR LE5
IPMI_LAN
BMC
X10SLD-F/HF
Rev. 1.00
JPME2
BIOS
Intel
VBAT
PCH
JBT1
JPME1
USB0
(3.0)
CPU1
A. UID SW/UID LED
B. PWR Switch/LED
2-16
UID Button
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Button In
UID LED
Status
Color/State Status
Blue: On Unit Identified
B