Memory Configuration - Supermicro X10SLD-F User Manual

X10SLD-F/X10SLD-HF User's Manual
Detect Non-Compliance Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is
not compliant with the PCI-E standards. The options are Enabled and Disabled.
Program PCI-E ASPM After OpROM
PCI-E ASPM, the Active State Power Management for PCI-Express slots, is a
power management protocol used to manage power consumption of serial-link
devices installed on PCI-Exp slots during a prolonged off-peak time. If this item
is set to Enabled, PCI-E ASMP will be programmed after OpROM. If this item
is set to Disabled, the PCI-E ASPM will be programmed before OpROM. The
options are Enabled and Disabled.
Micro-LP Slot-ASPM/Slot1-ASPM
Use this feature to set the ASPM (Active State Power Management) level for the
device installed on the PCI-E slot specified above. The options are Disabled,
Auto, ASPM L0s, ASPM L1, and, ASPM L0sL1.
DMI Link ASPM Control
This feature configures the ASPM (Active State Power Management) settings for
the devices/components connected to the DMI Link on the System Agent side.
The options are Disabled, L0s, L1, and L0sL1.
PCH Link ASPM Control
Select Enabled to support ASPM (Active State Power Management) for both
North Bridge and South Bridge. The options are Disabled and Enabled.

Memory Configuration


This submenu displays the information on the memory modules installed on the
motherboard.
•
Memory RC Version
•
Memory Frequency
•
Total Memory
•
Memory Voltage
•
DIMMA1
•
DIMMA2
•
DIMMB1
4-12