Connector Description - Supermicro SuperO A1SAM-2750F User Manual

A1SAM/A1SRM Series Motherboard Quick Reference
A1SAM/A1SRM Series Motherboard Jumpers
Jumper
JBT1 CMOS Clear
JD1 Onboard Buzzer (Also see the Connectors section below)
JI C1/JI C2 SMB to PCI-Exp. Slots
2 2
JPG1 VGA Enable
JPL1 Ethernet LAN Ports Enable
JPUSB1 USB Wake_Up Enable
JWD1 Watch Dog Enable
A1SAM/A1SRM Series Motherboard Headers/Connectors
Connector
Battery
COM1/COM2
FAN1-FAN3
JD1
JF1
JIPMB1
JL1
JOH1
JPI C1
2
JPK1
JPW1
JSD1
JSTBY1
JTPM1
JUIDB1
LAN1/LAN3, LAN2/LAN4
IPMI-LAN
I-SATA0-I-SATA5
Slot4
Slot6
SP1
USB 0/1, 2/3
USB 4/5
USB 6
Description
Onboard Battery (JBAT1)
COM1/COM2 Port Headers
System Cooling Fans
Power LED/Speaker Header(Pins 1-3: Power LED, Pins 6-7: Internal
Buzzer, Pins 4-7: External Speaker)
Front Panel Control Header
4-pin External SMbus I
Chassis Intrusion Header
Overheat LED Header
Power Supply System Management Bus (SMBus) I
LAN3/LAN4 LED Indication Header
24-pin ATX Power Connector
SATA DOM (Device_On_Module) Power Connector
5V Standby Power Connector
Trusted Platform Module (TPM)/Port 80 Connector
Unit Identifier (UID) Switch
Gigabit Ethernet (RJ45) Ports 1/3, 2/4
IPMI-dedicated LAN for IPMI 2.0 interface
(Intel) Serial ATA Ports 0-5
PCI-E 2.0 x 4 slot
PCI-E 2.0 x 8 slot
Internal Speaker/Buzzer
Backpanel USB 2.0 Ports 0/1, 2/3
Front Panel Accessible USB 2.0 Header USB (2.0) 4/5
Type A USB (2.0) 6
1-5
Chapter 1: Introduction
Off (Normal)
Pins 6-7 (Enabled)
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Description
C Header
2
Default
C Header
2