Jumper Description; Connector Description - Supermicro X11DPU-XLL User Manual

Hide thumbs Also See for X11DPU-XLL:
Table of Contents

Advertisement

Super X11DPU-XLL User's Manual
Quick Reference Table
Jumper
Description
JBT1
CMOS Clear
JPME2
Manufacturing Mode
JWD1
Watch Dog Timer Enable
LED
Description
LE2
Standby PWR LED
LED1
UID LED
LEDM1
BMC Heartbeat LED
Connector
Description
BT1
Onboard CMOS battery
COM1
COM port
FAN1 ~ FAN8
System/CPU fan headers (FAN1: CPU Fan)
IPMI_LAN JLAN1
Dedicated IPMI LAN port
I-SATA0 ~ I-SATA7
SATA 3.0 ports supported by Intel PCH
JF1
Front Control Panel header
(GPU PWR1 - GPU PWR4) power connectors used for GPU and VGA devices (Note: GPU and
JGPW1 - JGPW4
VGA devices are not supported on X11DPU-XLL motherboards with a PCB revision earlier than
1.02.)
JIPMB1
System Management Bus header for IPMI 2.0
Chassis Intrusion header (Note: Please connect a cable from the Chassis Intrusion header at JL1
JL1
to the chassis to receive an alert via IPMI.)
JNVI
C1, JNVI
C2
System Management Bus for CPU1 VPP/CPU2VPP
2
2
JP2
Complex Programmable Logic Device (CPLD) header
JPW1 - JPW4
(BP PWR1 - BP PWR4) Backplane power connectors for hard drives
JRK1
Intel VROC RAID key header for NVMe Solid State Devices (SSD)
JSDCARD1
Micro SSD (Solid State Drive) Card Slot (reserved for manufacturer use)
JSD1 - JSD2
SATA Disk-on-module (DOM) power connectors
JTPM1 TPM/PORT80
Trusted Platform Module/Port 80 connector
JUIDB2
Unit Identifi er (UID) Switch
JUSB3 USB3/4(3.0)
Internal USB header for two USB 3.0 connections (USB Port 3/Port 4)
JUSBA1 USB2(3.0)
Type A USB 3.0 header (Port 2)
NVME10, NVME11
P1_NVMe1, P1_NVMe2; On-Board NVMe 1 and 2 for high speed PCI-E storage devices on CPU1
NVME12, NVME13
P2_NVMe1, P2_NVMe2; On-Board NVMe 1 and 2 for high speed PCI-E storage devices on CPU2
PSU1
Power Supply Unit 1
PSU2
Power Supply Unit 2
SATA 4,5
(Powered) SATA connectors with power-pins built-in with support of SuperDOM
SP1
Internal Speaker/Buzzer
S-SATA0-3 (SATA DOM)
SATA 3.0 ports supported by Intel PCH
Default Setting
Open (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Green: Standby Power On
Solid Blue: Unit Identifi ed
Blinking Green: Normal
12

Advertisement

Table of Contents
loading

Table of Contents