Processor And Heatsink Installation; Installing The Lga1150 Processor - Supermicro X10SLD-F User Manual

2-3

Processor and Heatsink Installation

Warning: When handling the processor package, avoid placing direct pressure on the
label area of the fan.
Important:
•
Always connect the power cord last, and always remove it before adding,
removing or changing any hardware components. Please install the proces-
sor into the CPU socket before you install the CPU heatsink.
•
If you are buying a CPU separately, make sure that you use an Intel-certified
multidirectional heatsink only.
•
Please install the system board into the chassis before installing the CPU
heatsink.
•
When you receive a system board without a processor pre-installed, make
sure that the plastic CPU socket cap is in place, and none of the socket
pins are bent; otherwise, contact your retailer immediately.
•
Refer to the Supermicro website for CPU updates and support.

Installing the LGA1150 Processor

1. Gently press down the load plate handle and push it outward (to the right
side) to unlock it.
2. Once the load plate handle is unlocked, gently lift the handle to open the
load plate.
Load Plate
Handle Lock
Load Plate Handle
Handle Lock
Load Plate Handle
2-5
Chapter 2: Installation