Figure 8 Zyxel Utility: Security Settings - ZyXEL Communications PLA-450 User Manual

Chapter 2 Wireless Tutorial
1 Open the ZyXEL utility and click the Site Survey tab to open the screen shown next.
2 The wireless client automatically searches for available wireless networks. Click Scan if
you want to search again. If no entry displays in the Available Network List, that means
there is no wireless network available within range. Make sure the AP or peer computer
is turned on or move the wireless client closer to the AP or peer computer.
3 When you try to connect to an AP with security configured, a window will pop up
prompting you to specify the security settings. Enter the pre-shared key and leave the
encryption type at the default setting.
Use the Next button to move on to the next screen. You can use the Back button at any
time to return to the previous screen, or the Exit button to return to the Site Survey
screen.

Figure 8 ZyXEL Utility: Security Settings

4 The Confirm Save window appears. Check your settings and click Save to continue.
30
PLA-450 User's Guide