Firmware Upgrade Screen - ZyXEL Communications NBG6604 User Manual

Table 37 Maintenance > Time (continued)
LABEL
Apply
Cancel

14.6 Firmware Upgrade Screen

Find firmware at
extension, e.g., "V1.00(AARO.0).bin". The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload firmware to your
NBG6604.
Figure 60 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 38 Maintenance > Firmware Upgrade
LABEL
File Path
Choose File
Upload
Check for Latest
Firmware Now
Note: Do not turn off the NBG6604 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the NBG6604
again.
The NBG6604 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Chapter 14 Maintenance
DESCRIPTION
Click Apply to save your changes back to the NBG6604.
Click Cancel to begin configuring this screen afresh.
www.zyxel.com in a file that uses the version number and project code with a "*.bin"
DESCRIPTION
Click Choose File to find the location of the file you want to upload in this field.
Click Choose File to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
Click this to check for the latest updated firmware.
NBG6604 User's Guide
94