Table of Contents
Advertisement
Table 37 Maintenance > Time (continued)
L ABEL
Apply
Cancel
14.6 Firm wa re Upg ra de Sc re e n
Find firmware at
extension, e.g., "V1.00(AARO.0).bin". The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click
Ma inte na nc e
NBG6604.
Maintenance > Firmware Upgrade
Fig ure 61
The following table describes the labels in this screen.
Table 38 Maintenance > Firmware Upgrade
L ABEL
File Path
Choose File
Upload
Check for Latest
Firmware Now
Note: Do not turn off the NBG6604 while firmware upload is in progress!
After you see the
again.
The NBG6604 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Chapter 14 Maintenance
DESC RIPT IO N
Click
to save your changes back to the NBG6604.
Apply
Click
to begin configuring this screen afresh.
C a nc e l
www.zyxel.com
in a file that uses the version number and project code with a "*.bin"
>
. Follow the instructions in this screen to upload firmware to your
Firm wa re Upg ra de
DESC RIPT IO N
Click
to find the location of the file you want to upload in this field.
C ho o se File
Click
to find the .bin file you want to upload. Remember that you must decompress
C ho o se File
compressed (.zip) files before you can upload them.
Click
to begin the upload process. This process may take up to two minutes.
Uplo a d
Click this to check for the latest updated firmware.
Firm wa re Uplo a d In Pro c e ss
NBG6604 User's Guide
screen, wait two minutes before logging into the NBG6604
94
Advertisement
Table of Contents
Need help?
Do you have a question about the NBG6604 and is the answer not in the manual?