Oce CPS800 User Manual page 92

Combine print jobs
in the print job. A transparent arrow
subset one is 2-sided whereas subset two is 1-sided. As soon as a difference appears
in the same setting, the arrow becomes transparent. The transparent arrow indicates
that this particular setting has more than one value.
Repeat steps 5, 6 and 7 for all subsets.
8.
Note: You will notice that with every subset you create, an icon is added in the left
upper hand corner of the 'Original' and 'Print' section of the operator panel.
Enter the number of prints and press the Start key
9.
How to delete a subset
Press the Correction key
1.
'Delete last subset?'
Note: Press the Correction key
of prints in this subset were changed.
Press 'Yes' to delete the last subset.
2.
[36]
[36] Deleting a Subset
Note: Each time the operator presses the Correction key
deleted. This means that you can delete more than one subset. Remember the
following. When you have deleted the last subset and you press the Correction
key again, the job is deleted.
92 Chapter 3 Print Jobs on the Océ CPS800®
indicates that the setting is ambiguous, e.g.
on the operator panel. The screen displays the message
three times if the default settings and the number
.
, the last subset is