The Operator Attention Light (Optional) - Oce CPS800 User Manual

The Operator Attention Light (optional)

Introduction
The operator panel informs the operator when the system needs operator interaction.
However in most cases the operator takes care of more than one machine.
The operator attention light is used to indicate the state of the system when the
operator is not close to the system.
[6]
[6] The Operator Attention Light
The system can be in different states (statuses). The table below shows the possible
states in which the system needs operator interaction.
[14]
[14] System States
State
Idle
System in error
Job stopped
Nearly out of toner After some time without adding toner the system will stop.
Next job
contradiction
Next job 'On hold' After some time without removing the 'On hold' flag the system will
Note: To improve productivity, the operator is warned some time before the system
actually stops (warning).
Information
System has no jobs in the job queue.
Machine Recoverable Error/Operator Recoverable Error/Permanent
Error etc.
Due to a contradiction, check print, stop after a page etc.
After some time without removing the contradiction the system will stop.
stop.
The Operator Attention Light (optional)
33