Illustration
[59]
[59] On account log full
How to change the account log setting
Access the 'System manager' .
1.
Select 'KOS editor'.
2.
Enter the key operator PIN code.
3.
Select 1 of the 2 options in the 'On account log full' section.
4.
Close the KOS editor to activate the new setting.
5.
How to change the accounting behavior
Access the 'System manager' .
1.
Select 'KOS editor'.
2.
Enter the key operator PIN code.
3.
Press the 'Accounting behavior' key to select the needed account setting.
4.
Close the KOS editor to activate the new setting.
5.
Configure the accounting settings
139