Oce CPS800 User Manual page 38

The power modes of the Océ CPS800®
Machine off mode
The electrical power connection to the Océ CPS800
switch
Off mode
The Océ CPS800
color of the ON/OFF button
The initializing process begins. After some time, the operator panel displays the
basic settings and the Océ CPS800
Sleep mode
The Océ CPS800
some time. The settings of the ECO timer indicate the delay. The default value is 60
minutes. The key operator can change this value (see the configuration and
maintenance manual).
If the Océ CPS800
Océ CPS800
when the controller sends an automatic print job (only if the image processing unit
is still on).
Note: You can not put the Océ CPS800
Low power mode
The Océ CPS800
for some time. The settings of the ECO timer indicate the delay. The default value is
15 minutes. The key operator can change this value (see the configuration and
maintenance manual).
The Océ CPS800
panel, or when the controller sends an automatic print job (only if the image
processing unit is still on).
Note: You can not put the Océ CPS800
Stand-by mode
The Océ CPS800
38 Chapter 1 Introduction
.
®
has electrical power. This condition is indicated by the amber
®
turns into the sleep mode when the Océ CPS800
®
is in the sleep mode, the screen of the operator panel is off. The
®
switches back to Stand-by when you press the ON/OFF switch, or
®
turns into the low power mode when the Océ CPS800
®
switches back to stand-by when you press a key on the operator
®
is ready to accept and process the print jobs.
. You must press this button to switch the system on.
®
is switched to stand-by mode.
®
into the sleep mode manually.
®
into the low power mode manually.
®
is interrupted by the power
®
is not used for
®
is not used