Oce CPS800 User Manual page 36

The Copy Control Device (optional)
[16] CCD functions
Behavior
Remote
job-starting
Disable CCD
CCD scenarios
Job finished
A job has finished printing and all paper output is ready.
The job is removed from the queue. If there is another job in the queue, the next job
automatically starts (if there are still credits available).
Job cancelled due to insufficient credits
The operator stops a job, after the warning "Refill credits.".
All other jobs in the queue will stay in the queue and the next job will start
automatically. The new job will pause immediately because of insufficient credits.
36 Chapter 1 Introduction
Description
It is the responsibility of the key operator to disable automatic
print jobs. If automatic print jobs are not disabled, the current
operator will be charged for a job started by a remote user.
The key operator can disable the CCD in the KOS editor
(password protected). If the CCD is broken, the Océ
®
CPS800 can still be used.
(2 – 2)