Oce CPS800 User Manual page 41

[7]
[7] Progress Information
The length of the progress bar corresponds to the estimated initialization and
warm-up time of both the scanner and the printer. The progress bar displays the %
of the estimated time that has already expired. If a new estimation is available, the
remaining part of the progress bar corresponds to the newly-estimated remaining
time.
The printer needs a few minutes to reach the operating temperature.
How to turn off the Océ CPS800
Press the ON/OFF button
1.
until the LED is amber.
Press the icon '0' on the power switch
2.
interrupt the electrical power connection to the Océ CPS800
use this function every time the system is turned off.
Note:
The Océ CPS800
enable the ON/OFF function in the KOS editor. With 'Work days' the key operator
sets the days of the week on which the Océ CPS800
With 'Switch times' the key operator sets the time (in hours and minutes) on which
the Océ CPS800
Be advised that this function cannot be used if you shut down the Océ CPS800
the power switch
®
. The LED in the ON/OFF button
®
also has an automatic ON/OFF function. The key operator can
®
must switch on or off.
.
Turn on and off the Océ CPS800®
. Use this option only if you want to
®
. It is not necessary to
®
automatically turns on and off.
blinks green. Wait
®
with
41