Oce CPS800 User Manual page 126

Copying special originals and non-standard size originals
Special originals can cause problems in the automatic document feeder. Copy
special originals from the glass plate.
If the operator uses the glass plate, only 1-sided prints are possible. If the
originals are 2-sided, the operator must use the Set-build key (
2-sided prints from the glass plate.
The Océ CPS800
print an A4/Letter portrait original on an A3/Tabloid sheet in landscape
orientation, the operator must change the standard feed direction from long edge
feed (LEF) to short edge feed (SEF). The feed direction of the original now
corresponds with the feed direction of the sheet in the paper tray.
Note: This procedure is also valid for the automatic document feeder.
How to copy special originals
Put the original face down against the top left corner of the glass plate.
1.
Select the 'Standard job' template in the 'Copy' menu.
2.
Press the 'Original' key.
3.
Select 'Source'. Press the key for 'Orientation' to indicate the orientation of the
4.
original on the glass plate.
Select 'Sheet'. Press the key for 'Size' to indicate the size of the original.
5.
Press the 'Print' key. You can change all the required settings
6.
Extended Copy (original settings)' on page
Enter the number of prints with the numeric keys and press the Start key (
7.
126 Chapter 5 The Copy Function
®
can not rotate images. For example, if the operator wants to
(see 'Making an
108).
) to make
).