Table of Contents
Advertisement
Making an Extended Copy (print settings)
[58]
[58] Workflow Settings
Menu
'Workflow'
120
Chapter 5 The Copy Function
Settings
When to do
'Save settings'
This setting indicates that changed job settings
are saved in the mailbox. In the 'System
manager', define the default value.
'Check first
The setting indicates whether a check print
set'
should be made (Yes) or not (No) for all print
jobs. In the 'System manager', define the default
value.
'Set account
The value always shows the current system
number'
account number. If a job has no account number
and the 'Accounting behavior' is set to 'Job or
System', the system account number is used for
the job. If the operator manually specified an
account number when the job was created, the
job account number is used instead of the system
account number.
If the 'Accounting behavior' is set to 'System' the
system account number is always used (if an
account number was specified when the print job
was created, this number will be overruled by the
system account number).
'Banner'
The operator may decide to disable banners for a
particular mailbox job.
This setting is only enabled for mailbox jobs and
if banners are defined in the printer driver.
The machine selects paper tray 4 to print banner
pages by default.
'Paper
A job that contains mixed media types can result
registration'
in lower productivity. When you select 'Disable'
the entire job runs with the registration setting
for reference material. This will result in
maximum productivity.
Advertisement
Table of Contents
