Oce CPS800 User Manual page 43

How to adjust the workflow settings
Press the key for 'System manager'.
1.
Press the key for 'Workflow'. The table shows the settings you can change.
2.
[18]
[18] The Workflow Settings
'Workflow' menu Description
'Set account
number'
'Check first set'
'Save settings'
'Processing'
The value always shows the current system account number. If a job has
no account number and the 'Accounting behavior' is set to 'Job or
System', the system account number is used for the job. If the operator
has manually specified an account number when the job was created, the
job account number is used instead of the system account number.
If the 'Accounting behavior' is set to 'System' the system account number
is always used (if an account number was specified when the print job
was created, this number will be overruled by the system account
number).
The setting indicates whether a check print should be made (Yes) or not
(No) for all print jobs. In the 'System manager' you define the default
value.
This setting indicates that changed job settings are saved in the mailbox.
In the 'System manager' you define the default value.
'Keep sequence': The system will always print the jobs in the same order
as displayed in the job queue. If a job can not start printing, the system
will stop. No jobs will be printed.
'Keep going': The system will always try to keep producing. If a job in
the job queue cannot start printing, because the job is on hold or has a
start contradiction, other jobs in the job queue may overtake and start
printing.
Adjusting the System Manager Settings
43