The Memory (Scan Now, Print Later) - Oce CPS800 User Manual

The Memory (scan now, print later)

The Memory (scan now, print later)
Introduction
The Océ CPS800
storage area. The 'Memory' stores the postponed copy jobs of local copier users.
A postponed copy job from the memory that is sent to the job queue is a copy of the
job in the memory. The original job remains in the memory. In the 'Workflow' menu
of the job editor you can define that you want to save the changes of the job to the
memory.
To remove the job from the memory, the operator must delete the job.
Note: In the system manager you can define that you want to store changes to a job
in the memory ('Save settings') by default.
Remember the following.
If the system is turned off, all the jobs in the 'Memory' are removed.
If the system enters the low power mode or the sleep mode, all the jobs in the
'Memory' are removed. However, it is possible to keep the data when the system
enters an energy save mode. The key operator must change the settings for 'Keep
data in ECO mode' to 'Yes' to keep the jobs in the 'Memory' (see the
Configuration and Maintenance Manual).
The memory (scan now, print later)
[23]
[23] The Memory
72 Chapter 3 Print Jobs on the Océ CPS800®
®
has a 'Memory' to temporarily store copy jobs. This is a digital