Making An Extended Copy (Original Settings) - Oce CPS800 User Manual

Making an Extended Copy (original settings)

Making an Extended Copy (original settings)
Introduction
The Océ CPS800
brochure, a folder or a calendar. To make an extended copy, the operator must first
describe the original. Then the operator must describe the print.
Note: The automatic document feeder can hold a maximum of 40 originals (80 g/m
or 20 lb. bond). Divide the document into subsets to copy more than 40 originals with
the same settings
How to make an extended copy
The following steps summarize all the settings into a workflow.
[46]
[46] How to make an extended copy
Step
1
2
3
4
5
6
7
Describe the original
[47]
[47] workflow
Step
1
2
3
108 Chapter 5 The Copy Function
®
allows you to copy a complete document, for example a report, a
(see 'Combine different sets of originals' on page
Action
Put the originals in the automatic document feeder or on the glass plate
Select the 'Copy' menu
Select a template
Define the settings for the original
Define the settings for the print
Enter the number of prints with the numeric keys
Press the Start key (
Action
Select the 'Copy' menu
Select a template
Press the key for 'Original'
).
2
121).