Subnet Mask Menu; Ip Gateway Menu - Motorola DSR-4530 Operator's Manual

3

Subnet Mask Menu

IP Gateway Menu

44
Press the ENTER button to confirm the selection and exit the field.
Use the following procedure to set and view the Subnet Mask IP address (range:
000.000.000.000 to 255.255.255.255) for the lower Ethernet port on the back panel
of the DSR-4530. The subnet mask is represented in the common dotted-decimal
format. Contact the network administrator for details about configuring the
Ethernet port for operation on your local network.
Press the 56 buttons until the Subnet Mask menu appears (shown below).
PORT 10/100
E
To change the Subnet Mask, press the 4 button until the cursor is at the Subnet
Mask label, and press the ENTER button to move into the field. Use the 34
buttons to select the digit to change and then, while the cursor is on that digit, press
the 56 buttons to display the desired value. Repeat this process for each
applicable digit to be changed.
Press the ENTER button to confirm the selection and exit the field.
Use the following procedure to set and view the IP Gateway address (range:
000.000.000.000 to 255.255.255.255) for the lower Ethernet port on the back panel
of the DSR-4530. The IP Gateway is an address that is represented in the common
dotted-decimal format. Contact the network administrator for details about
configuring the Ethernet port for operation on your local network.
Press the 56 buttons until the IP Gateway menu appears (shown below).
PORT 10/100
E
To change the IP Gateway, press the 4 button until the cursor is at the Default
Gateway label, and press the ENTER button to move into the field. Use the 34
buttons to select the digit to change and then, while the cursor is on that digit, press
the 56 buttons to display the desired value. Repeat this process for each
applicable digit to be changed.
Press the ENTER button to confirm the selection and exit the field.
Subnet Mask
255.255.255.000
Default Gateway
192.168.000.001