Or, push the down arrow key to move to the next item on the configuration menu (BPS).
6-8 Configure Remote BPS (Baud rate)
The Remote BPS Set menu is used to configure the RS-232C computer control settings as
it
is important that they exactly match those of an associated computer connection or another
AR-ONE (connected via a male 9-pin to mail 9-pin straight cable).
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to "BPS SET" selection point.
Use the main tuning dial or the right arrow key or the left arrow key to select the desired
RS-232C baud rate between 4800bps and 9600bps. The default setting is 9600bps.
Push the ENT key to accept the data and return to a standard display.
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu
(RMT-ID).
6-9 Configure RMT-ID (Remote ID)
When multiple units are connected via remote connectors, each AR-ONE must be assigned
a different ID (address).
The value is adjustable between 00 ~ 99. The default value is 00.
Important notice: It is extremely important to set the RMT-ID to 00 for normal operation
of the RS-232C connection.
54