Table of Contents
Advertisement
8.1 Video output
PAL and NTSC composite output is switchable via the rear panel video switch.
When PAL format is selected the built-in LCD display will be inoperative. Video
output is available via the rear panel video PHONO socket.
8.2 Audio output
Constant audio output is available via this PHONO socket, a load impedance of 10k
OHMS is assumed for constant level output.
9 RS232C
The AR7000 can be operated remotely by a personal computer via the RS232C
socket. A separate RS232 command list may be available from the AOR web site or
head office. First check http://www.aorja.com or contact Kiyo Oshima at AOR Ltd,
Japan for further details.
AR7000
PC 9-way
2
2
3
3
5
5
7
7
8
8
When making an RS232 cable, always use good quality screened cable to minimise
noise.
10 AUX
A rear panel 270 8-pin DIN socket provides the following signals:-
Pin No.
IN/OUT
1
Out
2
-
3
In
4
NC
5
Out
6
Out
7
Out
8
NC
11 Infrared remote controller
The AR7000 can be operated via the supplied infrared remote controller. Aim the
front of the remote at the front panel IR sensor to the AR7000. Most IR keys mimic
those of the AR7000 and menus. The IR [POWER] key is valid only when the power
switch of the receiver is switched on (depressed). The IR uses 2 x AAA batteries,
PC 25-way
3
2
7 (GND)
4
5
Signal
Description
+12V
+12V, 10mA output
GND
GND
Mute input
5V TTL
NC
NC
AF out
Tape Rec 10k ohm
Rec out
SQ operated switch
Rec out
SQ operated switch
NC
NC
Hide quick links:
Advertisement
Table of Contents
