Reversing The Direction Of Search; Forcing The Search To Resume; Stopping The Search; Selection Of Search Bank - AOR AR-ONE Operating Manual

Ultra wide band communications receiver

Hide thumbs Also See for AR-ONE:

Table of Contents

5-2-1 Reversing the direction of search

To reverse the direction of search, use the main tuning dial or the up arrow key or the down

arrow key. This is useful to enable you to search back over an interesting point of the

process.

If the AR-ONE stops on an unwanted busy frequency, rotate the main tuning dial knob or

use the up arrow key or down arrow key to force the search process to resume from the

current frequency displayed.

While the search process is in progress (not stopped), push the VFO key (displaying the

data on-screen before search was started).

There are 40 search banks. While searching, use the right arrow key or left arrow key to

step

through search banks which contain data. If no data is programmed in the nominated

bank, the next bank containing valid data will be used.

Table of Contents