Tuning Frequency; Entering Frequency Using The Numeric Keypad; Changing Frequency Using The Main Tuning Dial; Changing Frequency Using Up Arrow Key Or Down Arrow Key - AOR AR-ONE Operating Manual

Ultra wide band communications receiver

Hide thumbs Also See for AR-ONE:

Table of Contents

step are automatically selected.

2-4-1 Tuning frequency

2-4-1-1 Entering a frequency using the numeric keypad

While in VFO mode, enter the required frequency using MHz format followed by the ENT

key.

Example of frequency entry of 80.8 MHz

Push the [8] key. Push the [0] key. Push the [.] key. Push the [8] key. Push the [ENT] key.

Example of frequency entry of 954 KHz (0.954 MHz)

Push the [.] key. Push the [9] key. Push the [5] key. Push the [4] key. Push the [ENT] key.

Aborting frequency input

If for some reason you do not wish to complete the frequency data input, push the ESC key

before completing the input sequence with the ENT key.

While in VFO mode, the active VFO frequency may be 'tuned' in using the rotary main

tuning

dial which is mounted on the right side of the front panel. You may rotate the dial 'clockwise'

to increase frequency or turn 'counterclockwise' to decrease frequency.

The UP arrow key and DOWN arrow key provide a convenient method of frequency

change.

Table of Contents