Table of Contents
Advertisement
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to "FRONT SP" selection point.
This menu is to configure the front speaker.
Use the main tuning dial or the right arrow key or the left arrow key to select the desired
rear speaker setting (ON or OFF).
Push the ENT key to accept the data and return to a standard display.
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu
(PHONES).
6-12-3 Configure head phones output
Push the down arrow key to move the cursor to "PHONES" selection point.
This menu is to configure the headphones output.
Use the main tuning dial or the right arrow key or the left arrow key to select the desired
head phones output setting (To access the configuration menu, push the FUNC key and
then push the 7 key.
ON or OFF).
Push the ENT key to accept the data and return to a standard display.
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu (Audio
Filter).
6-13 Configure audio filters (HPF / LPF)
The AR-ONE is equipped with an audio HPF (High Pass Filter) and a LPF (Low Pass
Filter).
6-13-1 Configure audio HPF (high pass filter)
The audio high pass filter is useful for limiting the audio bass response (allowing higher
tones to pass) improving intelligibility in certain circumstances (such as low frequency
whistles on AM, SSB & CW).
58
Advertisement
Table of Contents
