Table of Contents
Advertisement
Examples are "000" for the first channel location in memory bank "0" and "099" for the last
memory channel in memory bank "0".
"415" is the location: memory bank "4" channel "15".
The data contents of memory and search banks are held in a EEPROM so that no backup
battery is required for memory retention.
The stored data may be quickly and easily recalled, changed or deleted using the memory
recall and delete functions.
Note: When the receiver is switched OFF, all VFO data will be automatically stored into
EEPROM memory storage .
3-2 Storing VFO frequencies & data into memory
The process to save a displayed VFO frequency to memory is as follows:
a) In VFO mode, select the required frequency, mode, attenuator etc
b) Push the FUNC key, and then push the ENT key to go to the memory write screen
c) Use the keypad, main tuning dial or arrow keys to select the desired memory location
(BANK and CHANNEL)
d) Add a text comment (optional) or delete an existing comment
e) Push the ENT key to exit the menu and save the data to the specified memory
location
Let's assume that you are going to store the frequency of 123.500 MHz into memory bank
30
Advertisement
Table of Contents
