Free (Scan Free And Search Free) - AOR AR-ONE Operating Manual

Use the main tuning dial or the right arrow key or the left arrow key to select the desired
delay parameters.
2.0s The AR-ONE will wait the specified time after the squelch closes before
resuming scan or search.
HOLD The AR-ONE will stop indefinitely when an active frequency is located, this
is very useful when you don't want to miss that once-in-a-lifetime
transmission!
OFF The AR-ONE will resume scan or search instantaneously when the
squelch closes.
Push the ENT key to accept the data and return to a standard display.
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu (FREE).
6-11 Configure FREE (Scan free and Search free)
The scan free and search free parameter determines how long the AR-ONE will remain on
active frequency before resuming scan or search even though the frequency is still active.
This is useful if you wish to gain a snap shot of activity without the AR-ONE being tied to a
busy frequency for long periods of time (such as when monitoring active commercial
repeaters etc). Scan free and search free time saves you having to manually intervene to
force the scan or search process to resume and saves the need to lockout memory
channels or search frequencies using the PASS function. The limits are OFF and 0.1 to 9.9
seconds. The default setting is OFF.
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to "FREE" selection point.
Use the main tuning dial or the right arrow key or the left arrow key to select the desired
free
parameters.
Push the ENT key to accept the data and return to a standard display.
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu
56