Offset - AOR AR-ONE Operating Manual

Ultra wide band communications receiver

Hide thumbs Also See for AR-ONE:

Table of Contents

To change the RF Amplifier setting, push the FUNC key and then push the 5 key.

Selecting a new AMP parameter from the list of ON, OFF, AUTO by rotating the main

tuning

dial or arrow key. To accept the new AMP parameter, push the ENT key.

2-11 OFFSET

This function enables receive frequency to be quickly SHIFTED by a predetermined values,

this makes it easy to track duplex-transmissions or check repeater inputs/outputs. Offset

frequencies may be factory pre-programmed into the auto-mode band plan data for some

world market areas. Frequency offset may also be programmed manually.

The locations for frequency offset storage are numbered 00 to 47 with 00 acting as OFF,

this

makes 47 locations available.

Frequency offset may be programmed into VFO, memory channel and search banks. It is

most convenient to set-up in VFO mode then save the data to specific memory channels

for quick recall at a later date. Frequency offset is primarily designed for memory channel

Table of Contents