Table of Contents
Advertisement
"3" location "25" (325) while in VFO mode with the text comment of
If a mistake is made during programming, push the ESC key to abort entry and return to
VFO mode.
1) Start by selecting VFO mode then key in the frequency of 123.500 MHz, "mode and
step
size" are set to the default auto mode.
Push the VFO key to set the AR-ONE into VFO mode.
Push the 1 key.
Push the 2 key.
Push the 3 key.
Push the . (decimal) key.
Push the 5 key.
Push the ENT key.
2) Then push the FUNC key, and then push the ENT key to enter "memory input" mode.
Using the main tuning dial or arrow keys, enter 325 to store the frequency into the
location. (memory bank 3, channel number 25)
3)
Push the down arrow key to add the text comment "AIRBAND"
Use the main tuning dial to select the text and the arrow keys to move position of text
input.
A maximum of 12 characters may be added to each memory channel, it is
recommended that a minimum of three (3) be used for efficient use of the text search
function ( a minimum of 2 characters are required for text search).
To erase the text comment, push the SET key twice.
Push the ENT key to complete.
"AIRBAND".
31
Advertisement
Table of Contents
