Duo Frequency Receive (Frequency Offset Mode) - AOR AR5001D Manual

3-8-1-2 AUDIO OUTPUT BALANCE
VH
To read: VH<CR>
Response: VHnnn
3-8-2

DUO FREQUENCY RECEIVE (FREQUENCY OFFSET MODE)

One frequency above 25 MHz is set as a main frequency and an another frequency which is
in the range of within +/- 5MHz from the main frequency set as an offset frequency can be received
simultaneously.
The received audio for both frequencies is available at the headphone jack independently.
Mixed audio for both signals is available at the external speaker jack.
Either VFO mode or Memory mode can be used with this function.
Below are the conditions for Duo frequency receive function:
The main frequency must be above 25 MHz.
The offset frequency must be within +/- 5MHz from the main frequency.
Both frequencies must be in the same receive modes.
FM stereo is not available in this mode.
3-8-2-1 FREQUENCY OFFSET
WF
To read: WF<CR>
Response: WFpnnnnnnnnnn
3-8-2-2 FREQUENCY OFFSET (MAIN OFFSET FREQUENCY)
WM
While the center frequency of 10MHz bandwidth is fixed, the offset frequency
from the center frequency (set by this command) will become the main frequency.
The offset frequency from the main frequency (set by WF command) will become
All manuals and user guides at all-guides.com
VHnnn: n: 000 ~ 255
000: Main band 100%, Sub band 0 %
128: Main band 50%, Sub band 50%
255: Main band 0%, Sub band 100%
WFpnnnnnnnnnnn: (Hz)
p: +, - (Offset direction)
nnnnnnnnnn: 0 ~ 5 MHz (default: 0)
WMpnnnnnnnnnnn: (Hz)
p: +, - (Offset direction)
nnnnnnnnnn: 0 ~ 5 MHz (default: 0)
(default: 128)
36