Absolute Value - Rigol DS1000Z Series User Manual

Chapter 6 To Make Measurements

Absolute Value

Calculate the absolute value of specified signal source point by point and display the
results.
Press MATH  Math  Operator to select "abs":
Press Display to turn on or off the absolute value operation function.

Press Source to select the desired channels (CH1, CH2, CH3 or CH4).

Press Offset and use

Press Scale and use

Press Scale Reset, the instrument will adjust the vertical scale to the best value

according to the current configration automatically.
Press Options to set the start point, end point or turn on or off the inverted

display of the operation results.
Press Start to set the start point of the operation results.
Press End to set the end point of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
Press Auto Scale to turn on or off the auto scale function. When "ON" is
selected, the instrument will adjust the vertical scale to the best value according
to the current configration automatically.
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.
DS1000Z User's Guide
to adjust the vertical offset of the operation result.
to adjust the vertical scale of the operation results.
POSITION and HORIZONTAL
RIGOL
SCALE can also be
6-17