Pass/Fail Test - Rigol DS1000Z Series User Manual

Chapter 9 Pass/Fail Test
Chapter 9 Pass/Fail Test
Monitor the change of the signal by judging whether the input signal is within the
mask created. The test results can be displayed on the screen as well as be declared
through the system sound or the pulse signal output from the [Trigger Out]
connector at the rear panel.
The contents of this chapter:
To Enable Pass/Fail Test

To Select Source

Mask Range

Test and Ouput

To Save the Test Mask

To Load the Test Mask

DS1000Z User's Guide
RIGOL
9-1