Xor" Operation - Rigol DS1000Z Series User Manual

Chapter 6 To Make Measurements

"XOR" Operation

Perform logic operation on specified sources waveform point by point and display the
results. In operation, when the voltage value of the source channel is greater than
the threshold of the corresponding channel, it is regarded as logic "1"; otherwise
logic "0". The following common logic operation expressions are provided.
The results of logic "XOR" operation of two binary bits are as follows:
A B
0 0
0 1
1 0
1 1
Press MATH  Math  Operator to select "A^B":
Press Display to turn on or off the XOR operation function.

Press Source A and Source B to select the desired channels (CH1, CH2, CH3 or

CH4).
Press Offset and use

Press Scale and use

Press Scale Reset, the instrument will adjust the vertical scale to the best value

according to the current configration automatically.
Press Tre.A and use

Press Tre.B and use

Press Options to set the start point, end point or turn on or off the inverted

display of the operation results.
Press Start to set the start point of the operation results.
Press End to set the end point of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
Press Sens. to set the sencitivity of the operation results and the range available
is 0 div to 0.96 div.
Press Auto Scale to turn on or off the auto scale function. When "ON" is
selected, the instrument will adjust the vertical scale to the best value according
to the current configration automatically.
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.
DS1000Z User's Guide
A^B
0
1
1
0
to adjust the vertical offset of the operation result.
to adjust the vertical scale of the operation results.
to set the threshold of source A in logic operation.
to set the threshold of source B in logic operation.
POSITION and HORIZONTAL
RIGOL
SCALE can also be
6-11