I2C Decoding (Option) - Rigol DS1000Z Series User Manual

Chapter 7 Protocol Decoding

I2C Decoding (Option)

I2C serial bus consists of the clock line (SCLK) and the data line (SDA).
SCLK
SDA
Host
SCLK
SDA
SCLK: sample the SDA on the clock rising edge or falling edge.
SDA: denote the data channel.
Press MATH  Decode1  Decoder to select "I2C" and open the I2C decoding
function menu.
1. Press Decode to turn on or off the decoding function.
2. SCLK Setting
Press CLK to select any channel (CH1-CH4) as the clock channel.
3. SDA Setting
Press SDA to select any channel (CH1-CH4) as the data channel.
Note that press Exchange to change the source of clock between the clovk
source and data source.
DS1000Z User's Guide
Vcc
A2
A1
Device
A0
RIGOL
7-11