Displaying The Configuration For A Particular Vlan - HP PROCURVE 2610 Advanced Traffic Management Manual

Displaying the Configuration for a Particular VLAN

This command uses the VID to identify and display the data for a specific static
or dynamic VLAN.
Syntax:
Figure 2-18. Example of "Show VLAN" for a Specific Static VLAN
Show VLAN lists this
data when GVRP is
enabled and at least
one port on the switch
has dynamically
joined the designated
VLAN.
Figure 2-19. Example of "Show VLAN" for a Specific Dynamic VLAN
show vlan <vlan-id>
Static Virtual LANs (VLANs)
Port-Based Virtual LANs (Static VLANs)
2-23