..............page 4 IMPORTANT The PoE Planning and Implementation Guide is not being shipped with this switch. To view or print a copy see: www.procurve.com/manuals Note for the 2610-PWR Switches The 2610-PWR switches support some pre-standard PoE devices.
You may want to bookmark this Web page for easy access in the future. You can also register on the My ProCurve portal to receive a set of ProCurve switch manuals on CD-ROM. To register and request a CD go to www.procurve.com...
HP ProCurve Networking Support Services HP offers a wide variety of onsite and offsite support services for HP ProCurve networking products. For a list of available services, visit www.procurve.com and click on Customer Care.
When you replace a mini-GBIC with another mini-GBIC of a different type and then execute the write memory command in the switch console, the switch configures the port on the new mini-GBIC with the default mode (speed and duplex) settings used for new mini-GBIC type. The default mode for the mini-GBICs is Auto. The switch retains other port-specific configuration settings, such as trunking, Spanning Tree Protocol (STP), and VLAN values that were configured for the previous mini-GBIC.