HP PROCURVE 2610 Advanced Traffic Management Manual page 322

ProCurve Stack Management
Configuring Stack Management
■
■
In its default stacking configuration, a Candidate switch can either automati­
cally join a stack or be manually added ("pulled") into a stack by a Commander,
depending on the Commander's Auto Grab setting. The following table lists the
Candidate's configuration options:
Table 8-4. Candidate Configuration Options in the Menu Interface
Parameter Default Setting
Stack State Candidate
Auto Join Yes
Transmission 60 Seconds
Interval
Using the Menu To "Push" a Switch Into a Stack, Modify the Switch's
Configuration, or Disable Stacking on the Switch. Use Telnet or the
web browser interface to access the Candidate if it has an IP address. Other­
wise, use a direct connection from a terminal device to the switch's console
port. (For information on how to use the web browser interface, see the online
Help provided for the browser.)
1. Display the Stacking Menu by selecting Stacking in the console Main
2. Display the Stack Configuration menu by pressing
8-16
Convert the Candidate to a Commander
Disable stacking on the Candidate so that it operates as a standalone
switch
Other Settings
Commander, Member, or Disabled
No
Range: 1 to 300 seconds
Menu.
Configuration.
to select Stack
[3]