HP PROCURVE 2610 Advanced Traffic Management Manual page 237

Quality of Service (QoS): Managing Bandwidth More Effectively
Syntax: vlan < vid > qos priority < 0 - 7 >
Configures an 802.1p priority for outbound packets
belonging to the specified VLAN. This priority determines
the packet's queue in the outbound port to which it is sent. If
the packet leaves the switch on a tagged port, it carries the
802.1p priority with it to the next downstream device. You
can configure one QoS classifier for each VLAN-ID. (Default:
No-override
no vlan < vid > qos
Removes the specified VLAN-ID as a QoS classifier and resets
the priority for that VLAN to
show qos vlan-priority
Displays a listing of the QoS VLAN-ID classifiers currently
in the running-config file, with their priority data.
1. For example, suppose that you have the following VLANs configured on
the switch and want to prioritize them as shown:
Set Priority To 2
Set Priority To 5
Set Priority To 7
Figure 6-22. Example of a List of VLANs Available for QoS Prioritization
2. You would then execute the following commands to prioritize the VLANs
by VID.
Using QoS Classifiers To Configure QoS for Outbound Traffic
)
No- override .
6-47