HP PROCURVE 2610 Advanced Traffic Management Manual page 339

Viewing the Status of all Stack-Enabled Switches Discovered in the IP
Subnet. The next example lists all the stack-configured switches discovered
in the IP subnet. Because the switch on which the show stack all command
was executed is a candidate, it is included in the "Others" category.
Syntax:
Figure 8-24. Result of Using the Show Stack All Command To List Discovered Switches in the IP Subnet
Viewing the Status of the Commander and Current Members of the
Commander's Stack. The next example lists all switches in the stack of the
selected switch.
Syntax:
Figure 8-25. Example of the Show Stack View Command To List the Stack Assigned to the
show stack all
show stack view
Selected Commander
ProCurve Stack Management
Configuring Stack Management
8-33