HP PROCURVE 2610 Advanced Traffic Management Manual page 243

Hide thumbs Also See for PROCURVE 2610:

Table of Contents

Quality of Service (QoS): Managing Bandwidth More Effectively

For example, suppose that you want to prioritize inbound traffic on the

following source-ports:

Source-Port Priority

1. Execute the following commands to prioritize traffic received on the

above ports.

Figure 6-28. Configuring and Displaying Source-Port QoS Priorities

2. Remove port 1 from QoS prioritization.

Figure 6-29. Returning a QoS-Prioritized VLAN to "No-override" Status

Using QoS Classifiers To Configure QoS for Outbound Traffic

In this instance, No-

override indicates that port

A1 is not prioritized by QoS.

Show Quick Links

Chapters

Table of Contents