HP PROCURVE 2610 Advanced Traffic Management Manual page 129

Figure 5-5. Example of the RSTP Configuration Screen
7. Press the
8. Repeat step 6 for each additional parameter you want to change.
9. When you are finished editing parameters, press
10. If you have changed the Protocol Version, in step 1, reboot the switch now
[Tab] key or use the arrow keys to go to the next parameter you
want to change, then type in the new value or press the Space bar to select
a value. (To get help on this screen, press
, for Help, to display the online help.)
line, then press
[H]
Please see "Optimizing the RSTP Configuration" on page 5-13 for recom­
mendations on configuring RSTP to make it operate the most efficiently.
Actions –> line and press
settings and return to the Main Menu.
by selecting
6. Reboot Switch
Configuring Rapid Reconfiguration Spanning Tree (RSTP)
to select the Actions –>
[Enter]
to save the currently displayed spanning tree
[S]
Spanning-Tree Operation
to return to the
[Enter]
5-21