Water Level Message - Furuno UAIS TRANPONDER FA-150 Operator's Manual

2.7.5

Water level message

The water level message is sent by base stations to inform skippers about
actual water levels in their area. It is additional short-term information to the
water levels distributed via Notices to Skippers. The message contains the
country code(location), gauge ID and water level.
When you receive a water level message, a popup displays "MESSAGE!
WATER LEVEL". To see the contents of the message, do the following:
1. Press the MENU key to open the menu.
2. Select MSG then press the ENT key.
3. Select WATER LEVEL then press the ENT key.
4. Select a message then press the ENT key.
National unique ID of gauge
5. Press the MENU key to close the message.
Country code
Positive or negative value
[WATER LEVEL] 1/1
COUNTRY CODE: DE
GAUGE ID: 2047
WATER LEVEL: -83.82m
GAUGE ID: 2123
WATER LEVEL: -12.32m
GAUGE ID: 3234
WATER LEVEL: 83.82m
2. INLAND AIS
2-23